Keeping Your Engine Cool in Livonia, Michigan
January 8, 2017
The cooling system keeps Michigan vehicle's engines from overheating while they are driving around Livonia. Its job is to move heat away from the engine. Let's talk about the various components of the system and how they make this happen.
The radiator is the part most Livonia drivers associate with the cooling system. Coolant flows through the radiator which has fine cooling fins that draw the heat out of the coolant and dissipate it into the air. To make sure there's enough airflow over the radiator, a fan pulls air over the cooling fins even when the vehicle is idling.
In some vehicles, the fan is powered by the serpentine belt. On others, an electric motor runs the fan. Electric fans turn on and off as needed. You may have heard the fan kick on shortly after you turn your vehicle off. The sensor has determined that the engine needs a little help cooling down to a safe temperature.
A hose connects the radiator to the water pump. The water pump pushes the water into the vehicle engine block. Now the engine block and cylinder heads have passages for the coolant to pass through without getting into the oil or the combustion chamber. In the automotive community, these passages are referred to as the "water jacket."
While the coolant is passing through the water jacket, it absorbs heat from the vehicle engine on its way to the radiator for cooling. Between the engine and the radiator is a gatekeeper called the thermostat. The thermostat's job is to regulate the temperature of the engine just like your home thermostat regulates the temperature in your house. It gets your engine up to the correct operating temperature and then keeps it from overheating.
When you first start the engine, it's very cold and needs to warm up. So the thermostat blocks the flow of coolant to the radiator. As the engine warms up, the thermostat starts to let coolant flow through the system.
The final component the team at Elite Tire And Auto Care wants to point out is the overflow reservoir. This bottle is designed to hold some of the coolant. It'll have a mark that indicates whether or not you have enough coolant. This is where you should add coolant if you just need to top it off.
Caution: never open the reservoir or the radiator cap when the car's hot. The cooling system is pressurized, and opening those caps while it's hot can cause hot coolant and steam to escape resulting in serious burns.
Cooling system failure is the most common mechanical failure in vehicles around Livonia, Michigan . At Elite Tire And Auto Care, we can do a periodic inspection of the components for leaks, loose connections and weakening hoses.
Your vehicle manufacturer has also specified a cooling system service interval. With a cooling system service at Elite Tire And Auto Care in Livonia, the old coolant is replaced with correct clean fluid that contains the additives required to prevent corrosion. The additives are depleted over time and you need fresh fluid for adequate protection. Your radiator pressure cap should be replaced at this service as well.
Elite Tire And Auto Care
33729 Plymouth Rd.
Livonia, Michigan 48150
734.427.3100
Need Service?
More articles from Elite Tire & Auto Care

A Smart Inspection, Peace of Mind Before You Buy
August 2, 2026
With the price of new vehicles these days, you might be thinking about saving some money by buying a used one. But when you go to look at a vehicle, how in the world do you know what youre getting into? A look around the outside and a short test drive likely doesnt give you the confidence that... More

Start Me Up
July 26, 2026
You have a nice road trip planned out. Youre all packed, sit down in the drivers seat, go to start your vehicle up and Nothing! You might hear a click, but thats it. What do you do now? Your problem may be a bad ignition switch. There are other symptoms you may notice. A failing ignition swi... More

That Clunk Isn’t Normal: Why Your U-Joints Need Lubrication (Lubricate U-Joints)
July 19, 2026
If youve noticed a clunk when shifting from park to drive, accelerating from a stop or letting off on your accelerator, it may be your vehicle warning you about dry or failing U-joints. Those are small, critical components in your drivetrain that allow the driveshaft to flex as your suspension mo... More
